A Tale of Two Empires: A Little Something for Legion and 40k!

For the Emperor(s)!

“Today, the Rebellion Dies”

I really, really wanted to have some Valentine tanks painted for today. But as I didn’t have tan primer, some 40k and Legion models will have to suffice! I’ve gotten back into the painting game a bit, despite my shaky hands. I really want to put even a little dent into my ever-growing backlog.

I started with something special. A while back, I made a post about painting a Praetorian Guard Warhammer 40k army. While I let that project slip from my schedule, I decided to paint another test mini. My problem with the first was time; it simply took far too long per Guardsman to be viable. for me at least!

Swish, but you took 2 hours to paint!

This is my older test mini, done when I had hands that weren’t fighting me constantly. Its rather good, and the grey is unique among Praetorian Guard armies I have seen. But it simply takes too long to do, and might even be impossible given my tremors situation.

His replacement! In classic colours, I must admit I like it a teensy bit better.
I even managed to do the helmet strap!
The two models side by side.
And from the back. The yellow lace is so classic that it’ll stay no matter which paint scheme I stick with!
Not a bad bit of painting.

The new Guardsmen is painted in Classic Praetorian Guard colours, navy paints and simple tunics. He was much faster to paint, and importantly, still doable! I might end up going with a compromise. Grey facings and turnbacks but yellow lace and simple tunics. Let me know your thoughts!

Next up was a Terminator with a Banner. This was a daunting model to paint, and I must admit I messed up royally in parts, which is even worse given the rarity of the model! I don’t think its beyond salvageable however, and it still looks a decent tabletop standard mini.

The actual terminator went fairly well, it was the banner that caused me the worst issues. White paint that refused to cooperate no matter how much I thinned it, and shaky hands to make the detail nearly impossible!
As a Terminator of the Black Templars, he is a member of the Sword Brethren. This meant a red cross, and theoretically, a white helmet. I kept the red cross but omitted on purpose the helmet, given that white had been such an issue on the banner that turned out for the best!
An all over drybrush of Eshin Grey and Dawnstone was the basis of the armour, thoroughly soaked in Nuln Oil afterwards to darken it back up. The Fist I particularly like, and this Templar may have fought with the Crimson Fists in the past. Sons of Dorn stick together!
Ugh….the Banner. It would be alright if it wasn’t so chunky. Still, it looks OKAY enough for gaming. I just wish my white paint and shaky hands had not gotten in the way. Decals saved me from any major free-hand work. What is the V mean for this banner? Its a roman numeral for sure but I’m not sure for what yet!

Next up, something totally different. Watching a few Star Wars Legion Battle Reports really got my creative juices flowing, and with an unbuilt Iden Versio lying on my ‘to finish’ pile, I got right to work. Just like my previous Imperial Special Forces, I use the same recipe from my Black Templars and drybrush the highlights then dull down with washes.

Major difference here was red piping on the uniform and helmet. I need decals to properly make the helmet ‘pop’ but at least Iden clearly reads as something different then my blue striped ISF. I picked the helmet on purpose, as I want my Imperial Special Forces and Empire army in general to have helmets wherever possible. Its uniform regulations, what are we, rebel scum?

I went with the E11 Blaster. She can take a sniper rifle or repeating blaster, but I’ll let cards do the work here. Additionally, this leaves her hand free to do commander things!
Honestly, I find ISF and Inferno Squad easy to make look good. This was simply dry brushing and red striping to get done quickly. I have another box on its way to me, and I’ll be able to fill up my Special Forces slots with them, a nasty, and easy to paint, army!
The detail is crisp, and somebody more inclined then me can probably make them pop really well. That being said, the dry brush was effective.
Iden’s little droid was simple and easy, but has good effects on the table and I’m keen to put ‘Dio’ to work.

Finally, a 3D printed model. I really want my Empire army to evoke the ‘Battle of Mimban’ as depicted in Solo: A Star Wars Story, and I got from Skullforge Studios (I’ll include a link down below) their ‘Grunge Trooper’ set. These are Imperial Army troopers in wet weather gear, and are known by many names, ‘Mudtroopers’ and ‘Swamp Troopers’.

They actually aren’t Stormtroopers (Stormtroopers make an appearance during the Mimban battle and trench scenes, and are notable for being considered elite during when Solo is set.) Being part of the Imperial Army, they were eventually fully integrated into the Stormtrooper Corp much later, closer to the Original Trilogy timeline. But for now, they form the bulk of the Empire’s forces on Mimban, and are sent to die in massive human wave tactics. In old Legends canon they never got amalgamated, and continued in service until the end of the ‘Palpatine’ Empire. Imperial Army troopers do not currently have rules. My idea is to run them either as custom, hand-made units similar in strength to Rebel Troopers but with worse morale, or as simply Stormtroopers without Precise.

A simple uniform, and I was able to further make use of my random can of German Field Grey to get the basic colours on. I went extremely overboard with the mud details; I love filthy models! This model I believe is supposed to represent Han Solo as he was in the Imperial Army.
Corporal Han Solo is having a bad day. His cloak is completely covered in crud.
These miniatures should prove easy to paint, and Cpl.Han Solo here took no time whatsoever to get done.
The only flying he gets to do on Mimban is from explosions.

All in all, a good busy few days. I’m expecting to go back to work soon as Lockdown nears its end in Ontario. I’m looking forward to being back out there but I’ll miss the sheer amount of hobby time I got to do!

My plans right now are to get my Legion army finished, as it really isn’t that many models left, then get my 40k Praetorians ready for a ‘Glazers Creek’ refight I have planned in the summer. On top of my Flames of War and Team Yankee. Oh, and my Very British Civil War and Bolt Action/Konflikt stuff. Oh boy, I have a lot of stuff to get done!

I hope you all are staying safe out there, and Happy Wargaming wherever you may be in the world. Have a great Valentines Day, and cheap Chocolate Day afterwards!

*If you’d like your own Grunge Troopers, here is where I got them from! https://gumroad.com/skullforgestudios

British Steel: Matilda II in VBCW!

And ‘Boney’ Fuller too!

So Majestic! So Slow!

There has been a lot of 15mm Flames of War stuff on my blog recently, but that doesn’t mean I have forgotten my other projects. A setting I was eagerly wanting to return to was the Very British Civil War. But how to make it a nice, dramatic return?

I figured the easiest way was a big, chunky piece of British Armour. After much research to see if it was plausible(more on that later!), I decided on an early Matilda II. These tanks were a nasty surprise to the Germans in 1940, how bad would they be in 1938 in a civil war?

My printing set-up has not dealt with full-plates as well as I would have hoped, and watching this print was nerve-ranking. A corner of the raft was peeling off the bed, yet somehow despite everything the tank printed mostly fine!

Not pictured: A failed print! Huzzah!

Actually, as far as I can tell, it is good enough for table use. This is a file from the legendary M_Bergman on Thingiverse, and was originally scaled at 1:100th for 15mm use. I used Wargaming3D’s suggestion of scaling it up to 28mm, using 178.57% as my scaling guide. While I still think it might be a hair too small, all of my other 15mm rescaled VBCW uses the same scale number so it’ll match.

The file has tons of options, and I opted for a British Expeditionary Force version. I’m hoping that is it is a close enough resemblance to the early marks from 1937-39.

The business end of the 2-pounder. Weak by 1940 standards, but quite powerful for the Interwar period!

Now, this is a controversial tank to use. Most VBCW tanks are much older, 1920’s or early 1930’s designs. However, by June 1938 an order was placed for 140 of these wonderful tanks. Work was slow, and in our timeline only two were completed by 1939.

This early model has a ‘trench tail’

I’m both speeding that up and slowing it down for my particular rendition of VBCW. The first production models were made by Vulcan Foundry in Lancashire. From here on out, it is all alternate history, be warned!

Rather conveniently, Lancashire falls under Royalist control early on. With war kicking off, the Government forces are desperate for these behemoths to enter service, and an inter-service tug of war kicks off on who gets to use these, the BUF’s Armoured Corp led by General Fuller, or the British Army’s Royal Tank Regiment. With two vehicles completed, it is decided that they will see service as ‘breakthrough’ tanks, and General Fuller pushes for the BUF to be granted use of them to break the Liverpool Free State. One is sent via rail to break that Socialist stronghold. The second is sent to the southern front, to be based out of London and sent via rail to where it is most needed. Production is however slow, and reinforcements of this ‘Queen of the Battlefield’ is held up by lack of supplies.

I see these behemoths being used much like a King Tiger would be in Bolt Action; Prohibitively expensive, but capable of controlling the battlefield like nothing else in this timeline can. Short of the French selling Char B1’s to Anglican forces, very little has this kind of armour. However it is painfully slow.

I am considering using this as a scenario only tank, with the capability of it being captured! Those rail-lines are only so secure after all…

With troops next to it!

But wait, what is this?

Oh yeah, its General Fuller time.

This is a fantastic rendition of J.F.C Fuller, who in this timeline is a major player in the BUF military wing, by Footsore Miniatures. I got him with my intial VBCW order, and have been waiting for a moment to paint him up!

Fuller was a major advocate of early modern tank tactics, and helped plan the usage of tanks at the Battle of Cambrai. His ideas were shunned in his own country….but were adopted by such figures as Heinz Guderian in Nazi Germany, who paid to translate Provisional Instructions for Tank and Armoured Car Training into German. He was the only foreigner present at Nazi Germany’s first armed maneuvers in 1935. In 1939, as a guest of Adolf Hitler, he witnessed a parade held in the Fuhrer’s honour. When Hitler asked him “I hope you were pleased with your children?” Fuller responded with “Your Excellency, they have grown up so quickly that I no longer recognise them.”

In WW2 he was sidelined because of his rather obvious Nazi sympathies. In VBCW, he has seen considerably more success. How successful is up to each individual club or groups lore, but as discussed with my friend I have made him a Major General in the BUF, leading a Armoured Corp set up along his doctrines.

A gorgeous model, that I hope I even slightly did justice too. His facial features are finely detailed.
I purposely used a shinier wash on his black uniform, as if he is meticulously cleaning it. The badges are sculpted with detail and picked out nicely. The medal bar was harder: I sort of just dabbed colours onto it.
Done up in my traditional basing scheme!

All in all, a productive evening! My hands decided to cooperate today and remain steady, which made General Fuller doable.

We are expecting a large snowfall tonight, so it will be a while before I can get the Matilda painted. Which gives me time to consider which of my VBCW forces gets it! I’m tempted due to my royalist leanings to give it to the Royal Tank Regiment, but Fuller has strings he can pull to procure it for the BUF. I’ll print two eventually, but for now I am torn.

Well, I hope you enjoyed today’s ramblings, and I’ll more to show you folks soon! Happy Wargaming wherever you are, and stay safe everyone!